Replacing a Damaged Squeegee Bar at a Liverpool Law Firm
We recently sent an Engineer over to Liverpool to replace a damaged squeegee bar on a Viper Fang 20 HD Scrubber Dryer which had inadvertently become caught whilst pulling the machine out of a lift, the bar was now slightly bent and no longer as effective. The office building in Liverpool was occupied by a large law firm who employ over 150 people. The scrubber dryer was used every week night to clean the canteen and corridor floors and the lift was the only practical way to move the machine between floors. The squeegee bar which is sometimes referred to as the suction bar is the curved bar that runs at the back of the machine to collect the dirty water from the floor and extract it into the recovery tank using a vacuum. The bar uses a long rubber strip to scrape the water off the floor and needs to be straight in order to maintain a good contact with the floor. Replacing a Damaged Squeegee Bar on a Viper Fang 20 HD The curved squeegee blade is designed to be easily replaced ...